TVAC16000B User guide Version 01/2013 Original user guide in English. Retain for future refer
10 English 5.3 Connecting the docking station to the network To connect the docking station to the internet, proceed as follows: 1. Connect the n
11 English Screw the camera onto the mount and connect the power supply unit to the camera. 6. Operation To switch the monitor ON / OFF, press
12 English 6.2 Live view Explanation of symbols cSD card display No SD card Tip: Always switch off the device before r
13 English fTimer Schedule has been saved This symbol appears if a programmed recording is running. gRecording status Flashes red: the device i
14 English Network connection This option is only available if the monitor is on the docking station and the network cable is connected to the do
15 English 6.3 Event list All the recordings are displayed in the event list and are sorted according to the date. 6.3.1 List of recordings P
16 English Explanation of symbols c Live view Change to live view d Back Back to the main menu e Camera Select one of the numbered cameras to vi
17 English 6.4 Settings At the “Settings” menu item you can select the following items: 6.4.1 Camera settings cSelecting cameras to pair
18 English dDisplaying/concealing a camera Use the 9 buttons to display a camera or press the 8 button to conceal it. If you have not trained
19 English c Motion detection Here you can set the sensitivity of the motion detection for each camera. You can choose between “Low”, “High” and
2 English Introduction Dear customer, Thank you for purchasing this product. This product complies with current domestic and European regulatio
20 English e Timer recordings You can save a recording time to start recording at a very specific time. You can save up to 5 recording procedure
21 English d Securitycode The standard security code is: 123456 For reasons of security, change this code and enter a new password (max. 8 digits
22 English 6.4.4 Alarm settings c Duration Here you can select the required duration of the alarm. You can set the alarm duration individu
23 English 6.4.5 System settings c Energy saving mode Here you can activate or deactivate the automatic screen switch-off after 2 minutes.
24 English Setting the time // date Here you can set the date and time. Then save your entries. Note: AM = 00:00 – 11:59 PM = 12:00 – 23:59 Sa
25 English g Updating the system Always use the latest system firmware. You can download the latest version from our website at www.abus.com (ite
26 English 7. Remote access via app This 7" touch screen wireless monitor gives you the option of switching live to your cameras. The app for
27 English g Connection status If you have added you system successfully, the name of your system and the current connection status appear. Cli
28 English i Saving the PIN code If you want to save a PIN code for this APP, proceed as follows: 1. Open the “Setup PIN Lock” at 2. Enter a
29 English 10. Technical data Camera 7" monitor Number of IR LEDs 25 - Rechargeable battery running time - 1.5 hours Battery type - Li-Ion p
3 English Explanation of symbols The triangular high voltage symbol is used to warn of the risk of injury or health hazards (e.g. caused by elect
4 English 7. Wireless transmission The wireless range depends on a variety of environmental factors. The local conditions at the installation site m
5 English Contents 1. Intended use ...
6 English 1. Intended use This 7" touchscreen wireless monitor and the IR wireless outdoor camera enable you to easily transmit and display vi
7 English c 4. Device description 4.1 Monitordescription 4.2 Docking station description c Power
8 English 4.3 Camera description Meaning of the LEDs: LED Status Meaning Power LED O On (red) Camera on Off Camer
9 English 5. Installation 5.1 Installing the monitor 1. Connect the power supply unit to the monitor. 2. Switch the device on. Press the power
Comments to this Manuals