Abus Outdoor motion detector PIR Specifications
Browse online or download Specifications for Security access control systems Abus Outdoor motion detector PIR. Abus Outdoor motion detector PIR Specifications User Manual
- Page / 2
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
INSTALLATION HINTS
Product information on this and other PDL products are available on
www.pdl.co.nz and www.pdl.com.au
PRODUCT WARRANTY / 12 MONTHS
The 100SA140 Outdoor Motion Sensor has a 12 month warranty from
the date of purchase providing the unit is installed according to these
instructions, local wiring regulations and Codes of Practice. This
warranty is void on any unit which has been tampered with, damaged
by accident, improper operation or incorrect installation.
This guarantee is in addition to, and does not in anyway affect the
rights under the Consumer Guarantees Act 1993, if the Act applies
to the supply of this product and you are not acquiring the product
for a business use. If the Act applies and any term is inconsistent with
the terms or requirements of the Act that term shall be invalid without
affecting the remaining terms of the warranty.
Note: Under the CGA 1993, Schneider Electric advises that this
product does not contain user serviceable components thus spare
parts and repair facilities are not available.
In the event of a warranty claim, the product must be returned to the
point of purchase or direct to Australia/New Zealand distributors
together with the proof of purchase.
100SA140 leaflet.pdf 13 July 2009 BBV1877700 Rev00
Model 100SA140
Installation and Operating Instructions
140
o
OUTDOOR MOTION
SENSOR - IP44
FEATURES
• Ideal for security lighting - reacts to intruders, visitors and family
by turning the lights ON and OFF automatically.
• Motion detection for a range of 12 meters over an angle of 140
o
• All plastic housing - no earth wire required, ideal for replacing
existing outdoor sensors.
• Adjustable light level (LUX) and time delay controls.
• Can be mounted on a wall or under a soffit using the standard
mounting fixture. Can also be mounted on an internal or external
corner by using the corner mounting fixture. (Refer mounting
instructions).
PRINCIPLE OF OPERATION
The 100SA140 Passive Infrared Sensor (PIR) is a stand alone motion
sensor suitable for automatic switching of security applications in
domestic, commercial or industrial premises.
When movement of heat source (i.e. person, dog or car) within PIR
zone is detected by the sensor, it automatically switches on the light
or other connected load. If no further movement is detected the PIR
starts timing and will turn off the light after the preset “Time” period.
As long as there is movement in the PIR field of view the lighting will
stay ON. Any movement of a heat source could cause the sensor to
switch the lighting on (including hot air movement) i.e. drafts from an
open window or door, air vents close by, cars on the street or movement
in the neighbours property. This depends on the angle of the sensor
head and the distance from the sensor.
PIR FIELD OF VIEW
Side ElevationPlan View
140
0
Sensor
8m
approx
8m
approx
Ideal direction
of movement
(greatest sensitivity)
Not recommended
as a direction of
movement
Ideal
height
2–3.5
metres
12 metres (under ideal conditions)
Sensor
New Zealand Head Office:
PO Box 15 355,New Lynn,
Waitakere 0640, New Zealand
Telephone +64-9-829 0490, Fax +64-9-829 0491
www.pdl.co.nz
33 - 37 Port Wakefield Rd,
Gepps Cross, 5094,
South Australia
Freephone 1300 20 25 25, Freefax 1300 20 25 56
Telephone +61 8 8269 0511, Fax +61 8 8340 1724
www.pdl.com.au
Schneider Electric
Industrial New Zealand,
Telarc Reg. No. 061
registered to ISO 9001.
NATIONAL
ACCREDITATION
OF CERTIFICATION
BODIES
ISO 9001
CERT NO. 11595
QUA
LITY
A
S
S
E
S
S
E
D
PDL Electrical Products are
manufactured by
ISO 9001
REGISTERED
AIM SENSOR ACROSS,
NOT ALONG THE PATH
PROTECT
FROM RAIN
DON'T AIM
AT THE SUN
AIM SENSOR DOWN
TO REDUCE DISTANCE
AIM AWAY FROM
MOVING OBJECTS
KEEP AWAY FROM AIR VENTS
DON'T MOUNT ABOVE LAMPS
AVOID REFLECTED LIGHT
FROM BRIGHT SURFACES
(ie: mirror windows)
MOUNT THE
SENSOR LEVEL
SPECIFICATIONS
AC Supply 230/240V 50Hz
Detection Range 140∞ circular, 8m dia at 2.5m height.
Operating Temp -20
o
C ~ 40
o
C
Timer 4 sec. ~ 30 min adjustable
LUX 2 Lux ~2000 Lux adjustable.
Protection IP44 Weather Protection when
correctly installed.
Switching/Load Capacity:
Incandescent 1000W
Halogen 1000W
Fluorescent 500W
Compact Fluorescent 100W
Motor 100W
TROUBLE SHOOTING GUIDE
PROBLEM
Lights won't
come on.
Lights stay on.
Lights keep
turning on and
off (cycling).
Sensing angle
and distance
appear incorrect
CAUSE
Power not on.
Wired incorrectly.
Bulbs blown.
PIR not detecting your
movement.
Light conditions too
bright.
"Time" set to high.
Wired incorrectly.
Frequent changes in
heat are being
detected.
Changes in heat are
being detected from a
fixed heat source.
Changes in heat are
being detected from a
moving object.
Light and heat is being
reflected back onto the
sensor.
Sudden temperature
changes due to storms
or high winds
Angle of sensor head
pointing down too far.
POSSIBLE SOLUTION
Turn on indoor switch or
check fuse.
Check wiring is the same as
diagram.
Check the bulb still functions
or replace.
Adjust the angle/direction of
the PIR.For best results walk
across the beam.
Wait until light conditions are
duller or adjust the LUX
control up.
Turn knob to lower setting (4
sec to 30 min adjustable).
Check wiring as per the
diagram
Check sensing area for
possible heat sources i.e. air
vents, moving vehicles,
moving trees, and reposition
the sensor.
Check the sensing area for
air vents, light fittings or fans
and either reposition the
sensor or adjust the aim.
Check the sensing area for
moving vehicles, pedestrians,
animals, moving trees and
alter the aim of the sensor.
Alter aim of the sensor or
paint the reflecting surface
with a dull finish.
Turn sensor off until storm
passes or install in a
sheltered location.
Raise the sensor head to
increase the sensing distance
and angle.
1
2
Summary of Contents
Page 1 - SENSOR - IP44
INSTALLATION HINTSProduct information on this and other PDL products are available onwww.pdl.co.nz and www.pdl.com.auPRODUCT WARRANTY / 12 MONTHSThe 1
Page 2 - ADJUSTMENT CONTROLS
CHOOSING A LOCATIONThe sensor can be mounted under a soffit, on a wall or using thespecial mounting bracket to internal or external corners.Before mou
More documents for Security access control systems Abus Outdoor motion detector PIR
Related products and manuals for Security access control systems Abus Outdoor motion detector PIR
(88 pages)© 2020, manymanuals.com. All rights reserved. | 0.332 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals