Abus TVIP72000 User Manual download pdf (Page 40)

4.3 Aligning the camera module

Loosen one of the two screws to the left or right of

the camera module (see diagram on right, item 7).

Use the tool provided to do this (hexagon wrench).

You can now align the spherical camera module

vertically and (slightly) horizontally by inserting the

tool in the opening on the top of the camera module

(see diagram on right, item 8).

Retighten the fixing screw.

4.4 Description of the status LEDs

LED State Description

P – LED for displaying the

operating voltage

Constantly red Power supply active

S & L – Network status

S lights up orange, L flashes green

(at irregular intervals)

Network status is OK, IP assigned

correctly

S & L – Network status Both LEDs inactive Disconnected from network

4.5 Description of the reset button function

Function Description

To reset the camera to factory settings, press the

reset button on the camera. Then disconnect the

power supply to the camera but still hold the reset

button.

Now reconnect the power supply.

After 10 seconds release the reset button.

Now the camera is reseted to factory defaults.

Camera reset to the factory settings.

1 ... 39 40 41 ... 144

No comments

Abus TVIP72000 User Manual Page 40