Abus FUMK50020B Service Manual download pdf (Page 23)

- 23 -

 For window/door frames with a rabbet depth of less than 19 mm and sufficient

space, we recommend installing the wireless opening detector on the

window/door frame.

(Reverse installation is also possible in this instance, however.)

 For window/door frames with a rabbet depth of more than 19 mm, the wireless

opening detector must be installed on the leaf of the window/door using the 7 mm

magnet bracket plate.

Prior to installation, always check that the distance between the

detector and the magnet is sufficiently short that the magnet can be

reliably detected by the wireless opening detector.

To test the detector's triggering function, we recommend pre-assembling the

magnetic bracket and detector base temporarily, using the attached adhesive film

but not the screws.

Once you have checked this, we recommend installing the magnet bracket and

detector base using the screws to secure it in place permanently (you do not need to

pre drill the plastic).

You should always check the rabbet depth of the leaf before making any screw

connections and avoid the screws emerging on the opposite side. (If necessary,

screws may be shortened.)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 139 140

No comments

Abus FUMK50020B Service Manual Page 23