Abus Eyseo TVCC40000 User Manual download pdf (Page 124)

124

125

ABUS Security-Center

124

125

From private homes to commercial

properties: The Terxon SX from

ABUS Security-Center provides

the right level of security. Eight

freely programmable zones are at

your disposal for installing wired

detectors. The ninth zone is pre-

congured as an tamper zone.

Programming and operating are

conveniently done via the remote

LCD keypad (in delivery kit). In

the event of an alarm, a switching

output for the sounder and one for

the ashing light can be activated.

Nine additional transistor outputs

are available on the Terxon SX

board. You can use these to control

other external components (e.g.:

a speech dialer). You have also

several options for operating the

Terxon SX: Via a PIN code and

proximity chip key on the keypad,

or by simply turning the key in the

key-switch. In combination with

the Terxon 2WAY module, you can

even integrate wireless detectors

and control components.

Normally closed (NC) or double end •

of line (DEOL)

3 transistor outputs max. 500 mA, 8 •

transistor outputs max. 50 mA

Integrated power supply unit •

230VAC/12VDC (1A)

Optional pluggable relay module •

(AZ4140)

Incl. keypad with LCD display, •

buzzer and 11 languages to choose

from

Intended for backup battery •

12 V/7 Ah (not included in delivery

kit)

User code and installer code freely •

selectable

Up to 16 different users •

4-wire BUS-connection for up •

to 4 LCD keypads

250x event memory with time •

stamp

Certications: NCP, VSÖ, Incert, •

F&P

Dimensions panel •

(WxHxD): 235x235x85 mm, keypad

(WxHxD): 113x90x23 mm

Optional accessories:•

VdS battery 7 Ah•

Article number AZ4000

Terxon SX alarm panelArming made to order

One option is to activate the sy-

stem via the LCD keypad. These

keypads can be installed at se-

veral entrances and in protected

outside areas (IP54), so that it

remains possible to access the

house in several different ways.

The add-on keypad can also be

used in multi-story buildings.

The quickest and easiest way

to arm or disarm the Terxon is

to use the proximity chip key.

Simply hold the key in front of

the keypad (no need to make

contact).

Another easy and secure method

is to arm/disarm using the

key-switch, which can also be

installed in the outside area.

Depending on the situation and what your wants or needs are, you

have three convenient ways to arm/disarm the Terxon.

Terxon SX Alarm Panel

Terxon SX + Terxon 2WAY module =

bi-directional wireless for wired alarms

With the new Terxon 2WAY module, you can integrate all of the bi-

directional wireless components of the Secvest 2WAY into the Terxon. This

gives you countless new possibilities. You can arm and disarm the Terxon

SX at the push of a button via the bi-directional wireless remote control of

the Secvest 2WAY, for example. Four integrated LEDs always show you the

current status of the system.

The following components of the Secvest 2WAY can be integrated via the

Terxon 2WAY module: Wireless remote control, wireless keypad, wireless

key-switch, Secvest key, wireless outside and inside sounders (seepage

140).

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 163 164

Abus Eyseo TVCC40000 User Manual Page 124

Comments to this Manuals

Abus Eyseo TVCC40000 User Manual Page 124

Comments to this Manuals

Related products and manuals for Bridge cameras Abus Eyseo TVCC40000