Abus Eyseo TVCC40000 User Manual Page 155

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 154
154
155
154
155
The GSM interface has four alarm inputs and four alarm outputs (one relay and three transistors). 1 can be
dened as a „switch call“ type via the output. The outside illumination can be activated by detecting the
call number. The user selects the number of the device and hangs up after the second ring.
EXTERNALINTERNAL
GSM interface4 alarm inputs
analog telephone connection
PSTN simulation: Sending of digital protocols
to the emergency control center via GSM or
transmitting voice texts or SMS messages
4 alarm outputs ActionAlarm center, e.g. Terxon L
A
1
B
2
C
3
D
4
e.g. GSM fault
e.g. heating
on/off
e.g. light on/off
e.g. incoming call
Telephone number 6
Telephone number 3
Telephone number 2
Telephone number 1
Telephone number 5
Telephone number 4
Telephone number 8
Telephone number 7
GSM network
((( )))
analog telephone line
GSM Interface
The GSM interface transmits alarm
and system messages via SMS or
voice (in combination with the
speech module) to up to eight
different telephone numbers. The
GSM interface also simulates an
analog landline connection. When
the landline connection fails, the
digital control center protocols of
the Terxon alarm center (CID, SIA)
are then transmitted via the GSM
network. Thus, you have a second
transmission path for control center
protocols at your disposal via the
GSM interface. In addition to four
alarm inputs, the GSM interface has
four switching outputs for external
consumers (e.g. illumination,
heating, signal generators). You
can also activate these remotely via
SMS or a telephone call. You can
conveniently program the settings
on the GSM interface via software
on the PC.
4 alarm inputs
4 alarm outputs (1 relay + 3 tran-
sistors) for connecting additional
devices
8 contact call numbers
Monitored PSTN connection
Connection for analog terminals
Integr. quad band GSM module
Sabotage switch
8 SMS texts
8 call numbers per alarm input
Operating voltage: 14.4 VDC / 800
mA (integrated 230 V power supply
unit)
Space for 12 V/1.2 Ah emergency
battery (not included)
Incl. programming cable
Incl. conguration software
Dimensions (WxHxD):
185x275x65 mm, with antenna:
185x335x65 mm
Optional accessories:
12 V/1.2 Ah emergency battery
(BT2012)
GSM interface Speech module
Expand the GSM interface with the
speech module and you can also
record and send up to four voice
texts with a duration of ten seconds
each in addition to sending SMS
and digital protocols. In addition to
controlling the inputs of the GSM
interface, the voice messages can
also be assigned to events such as
sabotage, loss of telephone line or
power or low battery charge.
Article number AZ6450 Article number AZ6451
The comprehensive functionalities of the GSM interface at a glance:
Page view 154
1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 163 164

Comments to this Manuals

No comments